의료진 소개

  • 직위

    병원 교수

    학력

    ~ 경희대대학원 치의학과 박사

    경력 및 연수

    ~ 경희대학교치과병원 중앙기공실장
    ~ 경희대학교 치과병원 보철과 수련의

    학회활동

    ~ 대한심미치과학회 편집이사
    ~ 대한치과이식학회 교육위원
    ~ BPS Clinical Instructor

    저서

    2020.09 임플란트 진단과 치료계획 관련 실패 및 문제점 해결
    2018.10 Suction denture perfect guide
    2018.08 (치과의사를 위한) 임상기법 필수 50. 크라운·브릿지 편
    2018.07 스포츠 치의학
    2018.05 This is suction denture!
    2018.05 하악 총의치 흡착 테크닉 The Professional
    2017.07 Digital Dentistry의 진화와 검증
    2017.05 Denture repair : 국소의치·총의치·임플란트 오버덴처 파손의 원인과 수리방법
    2017.03 총의치 치료 실패하지 않는 포인트 45
    2016.12 노인치의학
    2016.05 What is suction denture?
    2016.01 총의치치료의 기공임상
    2015.10 (Jiro Abe의) 총의치 난증례 : 누구나 알고 싶은 임상의 진실
  • 논문

    2026.03 A digital workflow for implants in the esthetic zone: A clinical report from dentofacial diagnosis to cast-free prosthesis delivery with a 1-year follow up
    2021.03 Setting the sagittal condylar inclination on a virtual articulator by using a facial and intraoral scan of the protrusive interocclusal position: A dental technique
    2021.01 A case series of profilometric changes in two implant placement protocols at periodontally compromised non-molar sites
    2020.10 인공치의 표면처리가 3D 프린팅 의치상레진과의 전단결합강도에 미치는 영향
    2020.08 A technique for transferring the contours of a functional impression to the polished surfaces of digitally fabricated removable complete dentures
    2020.05 Biomechanical stability of internal bone-level implant: Dependency on hex or non-hex structure
    2020.02 Setting the Sagittal Condylar Inclination on a Virtual Articulator Using Intraoral Scan of Protrusive Interocclusal Position and Cone Beam Computed Tomography
    2020.01 Oral Soft Tissue Regeneration Using Nano Controlled System Inducing Sequential Release of Trichloroacetic Acid and Epidermal Growth Factor
    2019.11 2급 악간관계를 보이는 하악 무치악 환자에서 디지털 진단기술을 이용한 임플란트 피개의치 수복증례
    2019.07 Ceramill full denture system을 이용한 무치악 환자의 양악 총의치 제작
    2019.06 Combining Conventional Impressions and Intraoral Scans: A Technique for the Treatment of Complete Denture Patients with Flabby Tissue
    2019.02 Comparing accuracy of denture bases fabricated by injection molding, CAD/CAM milling, and rapid prototyping method
    2019.02 Precise Reproduction of Soft Tissue Structure around the Pontic Area Using Computer-Aided Design and Manufacturing
    2019.01 전통적 방식과 CAD/CAM을 이용한 양악 총의치 수복 증례
    2018.10 의치사용자의 구강건강, 의치관리 및 의치건강보험 인식에 대한 실태 조사
    2018.10 Flabby tissue를 동반하는 골격성 Class III 환자의 양악 총의치 수복 및 적합성/안정성 평가 증례
    2018.07 장기간의 유지관리 실패로 인해 파절된 임플란트 피개의치 재수복 증례
    2018.07 심한 마모를 가진 환자에서 전자 서베잉을 이용한 금관 및 국소의치 수복 증례
    2018.06 A 10-year cone beam computerized tomography observation of the buccal bony wall of an immediately placed implant at the anterior maxilla: A case report
    2018.04 Effects of moderate intensity static magnetic fields on osteoclastic differentiation in mouse bone marrow cells
    2018.01 심한 골격성 class III 환자에서 교합양식을 고려한 총의치 수복증례
    2017.11 A simplified method for evaluating the 3-dimensional cement space of dental prostheses by using a digital scanner
    2017.10 지속적인 재평가를 통해 최적화된 임시 보철을 최종 보철로 이행한 전악 CAD/CAM 고정성 수복 증례
    2017.09 A method for minimizing rotational errors of implant prostheses
    2017.06 Stress analysis of mandibular implant overdenture with locator and bar/clip attachment: Comparative study with differences in the denture base length
    2017.04 전치부의 심미 수복을 위하여 Digital Smile Design을 적용한 증례
    2017.01 심한 우식을 동반한 골격성 전치부 개방 교합 환자의 전악 수복 증례
    2017.01 Coloring agent가 지르코니아 색조 재현성에 미치는 영향
    2016.12 Comparative Analysis of Screw Loosening with Prefabricated Abutments and Customized CAD/CAM Abutments
    2016.11 심한 Erosion 환자에서 수직고경증가를 동반한 구강회복 증례
    2016.11 치근피개술과 Lithium disilicate glass ceramic 수복을 통한 상악 중절치의 심미 보철 증례
    2016.11 CAD/CAM을 이용한 진료실 design과 기공실 design의 비교 분석
    2016.08 Fabrication of a CAD/CAM monolithic zirconia crown to fit an existing partial removable dental prosthesis
    2016.05 Fabricating a tooth- and implant-supported maxillary obturator for a patient after maxillectomy with computer-guided surgery and CAD/CAM technology: A clinical report
    2016.01 In Vitro Osteogenic Differentiation Enhanced by Zirconia Coated with Nano-Layered Growth and Differentiation Factor-5
    2016.01 저위교합된 임플란트 보철물 재수복 증례
    2015.10 Prosthetic management of a growing patient with Russell-Silver syndrome: a clinical report
    2015.07 총의치 난증례에 대한 접근법: 진단부터 최종의치까지
    2015.06 Biofunctional Prosthetic System(BPS)를 이용한 심미 총의치 제작
    2015.04 Digital Smile Design’을 이용한 심미수복증례
    2015.01 Melatonin promotes hepatic differentiation of human dental pulp stem cells: clinical implications for the prevention of liver fibrosis
    2014.10 Deferoxamine promotes osteoblastic differentiation in human periodontal ligament cells via the nuclear factor erythroid 2-related factor-mediated antioxidant signaling pathway
    2014.08 Does clenching reduce indirect head acceleration during rugby contact?
    2014.08 Human Hair Keratin and Its-Based Biomaterials for Biomedical Applications
    2014.08 A large sialolith on the parenchyma of the submandibular gland: A case report
    2014.07 Combined effects of dentin sialoprotein and bone morphogenetic protein-2 on differentiation in human cementoblasts
    2014.06 Shock absorption ability of mouthguard against forceful, traumatic mandibular closure
    2014.04 Cell attachment and proliferation of bone marrow-derived osteoblast on zirconia of various surface treatment
    2014.04 Fiber reinforced composite post의 표면 처리에 따른 접착 강도
    2014.03 Involvement of SDF-1 and monocyte chemoattractant protein-1 in hydrogen peroxide-induced extracellular matrix degradation in human dental pulp cells
    2014.02 Paired maxillary and smaller mandibular mouthguard for rugby player with malalignment
    2014.02 TO DEFINITIVE CAST ACCURATE TRANSFER OF SOFT TISSUE MORPHOLOGY WITH INTERIM PROSTHESIS
    2014.01 Prosthetic Rehabilitation of a Cleidocranial Dysplasia Patient with Vertical Maxillofacial Deficiency: A Clinical Report
    2013.12 Lithim disilicate 열가압 도재를 이용한 다양한 임상증례
    2013.11 Gene expression of MC3T3-E1 osteoblastic cells on titanium and zirconia surface
    2013.10 심미적 부위에서 가공치 하방 잔존치조제의 형성 및 연조직 복제 모형을 이용한 고정성 보철물 수복증례
    2013.06 PROSTHETIC REHABILITATION OF A PATIENT WITH UNILATERAL DISLOCATED CONDYLE FRACTURE AFTER TREATMENT WITH A MANDIBULAR REPOSITIONING SPLINT: A CLINICAL REPORT
    2013.02 Implant-supported fixed restoration of post-traumatic mandibular defect accompanied with skin grafting: A clinical report
    2013.02 The effects of mouthguards on the athletic ability of professional golfers
    2012.08 THE PROSTHETIC REHABILITATION OF A PANFACIAL FRACTURE PATIENT AFTER REDUCTION: A CLINICAL REPORT

    학술활동

    여러 가지 연마 방법이 지르코니아의 표면 거칠기에 미치는 영향에 관한 연구
    Rapid prototyping 방식으로 제작된 모형의 표면 거칠기에 대한 연구
    Comparative analysis on screw loosening of prefabricated abutments and CAD/CAM Abutments
    Pontic site development and soft tissue transfer on tic area
    Prosthodontic treatment of the russel-silver syndrome: case report
    Strain analysis of mini-implant reained mandiblar overdenture
    과도한 치은비대를 동반한 교합 고경이 소실된 부분 무치악 환자의 치료증례
    심한 치조골 흡수와 불안정한 하악위를 가진 완전무치악 환자의 치료증례
    두가지 다른 인상법(Conventional tech. VS Suction-effective tech.)으로 채득한 하악 총의치 변연형태의 비교
    하악이 편측으로 변위된 하악과두 골절환자의 하악 재위치 스프린트(mandibular repositioning splint)치료 후, 보철 수복을 통한 교합 재구성의 임상적 증례
    임시수복물 주변의 치은형태를 주모형에 정확히 옮기는 방법
    Pressable ceramic을 이용한 전악 수복 증례
    심미성 및 치주조직의 유지 관리를 고려한 임플란트 보철 증례
    Hard layer 및 air space 부여를 통한 mouth guard제작법
    동적의치상이장재(DIL; Dynamin Impression Liner)의 임상적용
    금 나노 입자를 이용한 임플란트 표면의 골 활성도
    Implant supported obturator prosthesis after partial maxillectomy using stereolithographic surgical template and CAD/CAM-milled titanium bar
    이중관을 이용한 부분 무치악 환자의 전악 수복 증례
    무치악 난증례 환자의 진단의치를 통한 평가 및 최종의치로의 이행
    라미네이트 제작방식과 도재의 종류가 색조에 미치는 영향에 대한 연구
    Prosthetic rehabilitation of a patients with edentulous maxilla using OSSTEM TSIII and pressable ceramics
    Clinical and radiographic evaluation of MS implant placed in mandibular incisor area with immediate loading: A retrospective study
    도재의 종류와 제작방식이 라미네이트의 색조에 미치는 영향
    Root coverage와 lithium disilicate glass ceramic 수복을 통한 상악 중절치의 심미 수복 증례
    하악골 재건후 제한된 악간공간을 가진 환자의 나사유지형 임플란트 보철수복 증례
    임플란트를 이용한 심한 치아 우식 환자의 완전 구강회복 증례
    Implant-supported obturator prosthesis after partial maxillectomy using stereolithographic surgical template and CAD/CAM-milled titanium bar
    Comparison of mandibular complete denture by conventional vs suction-effective technique
    Prosthodontic restoration of a young patient with russell-silver syndrome
    Life quality assessment depending on personal characteristic and denture installation
    Optimal denture coverage over retromolar pad for lower denture retention
    상악골 절제술 환자에서 컴퓨터 가이드 수술과 CAD/CAM을 이용한 치아, 임플란트 지지 상악 폐쇄장치 제작
    반복하중이 NCF 크라운의 유지력에 미치는 영향
    하악골 재건 환자에서의 임플란트 고정성 수복 증례
    Sinus bone grafting with simultaneous implant placement in case of residual bone height less using internal bone level implant
    전치부 보철 수복에 digital smile design을 적용한 증례
    CAD/CAM 제작 총의치 치료의 현주소
    심한 우식을 동반한 골격성 전치부 개교교합 환자의 전악 수복 증례
    총의치의 교합채득법과 교합양식
    CADIAX compact4를 이용한 전악 수복 증례
    혼합치열기 부분 무치증 어린이에서 반대 교합된 상악 측절치 형태이상 수복 증례
    내부연결 임플란트에서 지대주 연결부 형태가 수직적 침하와 나사풀림에 미치는 영향
    CAD/CAM을 이용한 진료실 design과 기공실 design의 비교 분석
    상악 전치부 치은 구조의 보철적 개선을 통한 심미 수복 증례
    Comparative analysis of the dental office design and the laboratory design using CAD/CAM
    Sinus bone grafting with simultaneous implant placement in case of residual bone height less using internal bone level implant
    누구나 할 수 있는 하악 총의치의 흡착, 그리고 BPS
    Marginal and internal fit of lithium disilicate crowns assessed by the triple-scan protocol
    심한 골격성 class III환자에서 교합양식을 고려한 총의치 수복
    교합이 붕괴된 환자의 고정성 보철 수복 증례- 시행착오를 거쳐 얻은 임시보철물을 최종 보철물로 정확하게 이행하기
    Triple-scan protocol을 이용한 전부도재관의 변연 및 내면 적합도에 관한 연구
    외상으로 치근 파절된 상악 중절치의 지르코니아 지대주를 이용한 전치부 단일 임플란트 심미 수복 증례
    전치부 단일 임플란트 보철물의 연조직 결손의 비수술적 접근법
    CAD/CAM과 conventional method로 제작된 의치상의 적합도 정도 비교
    CT영상 재구성을 통한 구개부 연조직 두께 측정 연구
    하악흡착의치 인상과 난증례의 해결
    Digital Complete Denture의 현재와 미래
    기존 임플란트를 이용한 임플란트 피개의치 재수복 증례
    연질 이장재의 시간 경과에 따른 체적 변화 연구
    Flabby tissue를 동반하는 골격성 Class III환자의 양악 총의치 수복 증례
    의치성 구내염 현황 및 관리 실태조사
    심하게 흡수된 하악 완전무치악의 인상채득
    Panfacial Fracture 의 Reduction 한계를 전악 보철 수복으로 극복한 증례
    흡착 총의치 실전 라이브
    Cementless Fixation 시스템과 시멘트 유지형 보철물에서 응력분산 비교
    굴곡된 전치부 영역에서 디지털과 통상적 인상법의 정확성에 관한 3차원적 비교연구
    시멘트타입 임플란트 보철물과 CLF 시스템 임플란트 보철물의 미생물 투과도 비교
    Complete Denture of a skeletal Class III patient with flabby tissue: A case report.
    comparison of palatal fit of dentures fabricated by injection-molding techniques versus rapid prototyping and milling
    Effect of Fabrication materials and techniques on color of veneers
    임플란트 고정체 간의 3차원 거리 비교를 통한 임플란트 인상법의 정확도 연구
    가압 주형법과 CAD/CAM 밀링 방식을 이용한 양악 총의치 수복 비교 증례
    장기간 무치악 환자에서 3D printer를 활용해 모형없이 제작한 양악 총의치 수복증례
    2급 악간관계를 보이는 무치악 환자에서 디지털 진단 기술을 이용한 임플란트 피개의치 수복증례
    임플란트 보철에서 오차 극복하기
    3D프린팅을 이용한 디지털 총의치 제작
    Hard layer및 air space부여를 통한 새로운 mouth guard제작법
    총의치 치료의 문제점 극복하기
    하악의치의 흡착을 위한 인상 테크닉 총정리
    총의치 난증례 환자 극복하기
    얼굴 스캔과 구강스캔을 통해 CAD/CAM 방식으로 제작한 전치부 지르코니아 고정성 보철물
    임플란트를 이용한 심한 우식 환자의 완전 구강회복 증례
    Mechanical complecation and lisk factors associated with CAD/CAM custom abutments: a 4-year retrospective study
    수중에서 보관한 총의치의 체적변화에 대한 연구
    3차원 적층 출력으로 제작된 의치상 레진과 인공치의 표면처리에 따른 전단결합강도
    Various techniques for replicating peri-implant soft tissue contours of implant supported fixed dental prostheses
    심한 치조제 흡수 환자에서의 임플란트-지지 국소의치를 활용한 완전구강회복 증례
    환자 분석과 치료계획 및 기공물 제작 과정에 디지털 방식을 적용한 전악 가철성 보철 수복 증례
    CAD/CAM 기술을 활용한 양악 총의치 수복 증례
    심한 마모와 부식을 지난 골격성 III급 환자의 교정치료를 동반한 수복증례
    치은 모델을 이용한 임플란트 내 다양한 직경의 어버트먼트 축 방향 변위
    내부 연결형 임플란트에서 기성 지대주와 맞춤 지대주의 수직 침하 비교
    총의치 인상채득의 정석
    Multilayer precolored zirconia의 종류에 따른 색조 분포에 관한 연구
    하악의 Orientation과 하악의 개구 패턴에 대한 기하학적 분석: Pilot study using Cone beam CT and Intraoral Scanner
  • 감사편지

    감사와 응원의 메시지를 전해주세요.

    나도 작성하기

    준비중입니다.

로딩중 페이지 로딩중입니다.

잠시만 기다려주시기 바랍니다.