| 병원 | 교수 |
|---|
| ~ | 경희대대학원 치의학과 박사 |
|---|---|
| ~ | 경희대대학원 치의학과 석사 |
| 2025 ~ 현재 | 경희대학교치과병원 통합진료센터장 |
|---|---|
| ~ 현재 | 경희대학교치과병원 보철과장 |
| ~ | 이화여자대학교 목동병원 치과 조교수 |
| ~ | 대한치과보철학회 편집(국문)이사 |
|---|---|
| ~ | 대한턱관절교합학회 섭외이사 |
| 2017.09 | 고정성치과보철학 : 원리와 임상 |
|---|---|
| 2017.02 | 최신 고정성 보철학 |
| 2014.05 | 고정성 치과보철학 실습서 |
| 2014.05 | 고정성 치과보철학 실습서 |
| 2012.05 | 고정성치과보철학 |
| 제19회 과학기술우수논문상 | |
| 우수논문발표상 |
| 2025.02 | Influence of template design on the accuracy of static computer-assisted implant surgery |
|---|---|
| 2024.03 | Accuracy of impression methods through the comparison of 3D deviation between implant fixtures |
| 2023.02 | Assessment of the fit of lithium disilicate crowns at various locations fabricated by three different methods using the triple-scan protocol |
| 2020.12 | Novel method of radiographic stent for presurgical evaluation of implant placement: A technical report |
| 2020.10 | 인공치의 표면처리가 3D 프린팅 의치상레진과의 전단결합강도에 미치는 영향 |
| 2020.02 | Setting the Sagittal Condylar Inclination on a Virtual Articulator Using Intraoral Scan of Protrusive Interocclusal Position and Cone Beam Computed Tomography |
| 2020.01 | Virtual diagnostics and guided tooth preparation for the minimally invasive rehabilitation of a patient with extensive tooth wear: A validation of a digital workflow |
| 2019.12 | Immediate Placement of Single Implant in Maxillary Anterior Tooth by Transferring the Emergence Profile from the Provisional Restoration to the Definitive Restoration: A Case Report |
| 2019.12 | Integrating a facial scan, virtual smile design, and 3D virtual patient for treatment with CAD-CAM anterior zirconia fixed dental prosthesis: a clinical report |
| 2019.12 | Radiographic stent for presurgical evaluation of implant placement: Design protocol using none dental CAD software |
| 2019.07 | 전통적 방식과 CAD/CAM을 이용한 양악 총의치 수복 증례 |
| 2019.07 | Ceramill full denture system을 이용한 무치악 환자의 양악 총의치 제작 |
| 2019.07 | 심한 부식 환자의 디지털 치관연장술 가이드를 이용한 전악 수복 증례 |
| 2019.06 | Combining Conventional Impressions and Intraoral Scans: A Technique for the Treatment of Complete Denture Patients with Flabby Tissue |
| 2019.02 | Comparing accuracy of denture bases fabricated by injection molding, CAD/CAM milling, and rapid prototyping method |
| 2018.12 | 디지털 Data와 3차원 분석에 대한 고찰 |
| 2018.12 | 치아 마모로 인한 수직고경감소 환자에서 CAD-CAM 단일 구조 지르코니아를 이용한 완전구강회복 증례 |
| 2018.10 | 장기간의 유지관리 실패로 인해 파절된 임플란트 피개의치 재수복 증례 |
| 2018.10 | Flabby tissue를 동반하는 골격성 Class III 환자의 양악 총의치 수복 및 적합성/안정성 평가 증례 |
| 2018.10 | 심한 마모를 가진 환자에서 전자 서베잉을 이용한 금관 및 국소의치 수복 증례 |
| 2018.08 | 심미적 최종보철물 수복을 위한 발치 후 임플란트의 즉시 식립과 임시보철물 장착: 증례 보고 |
| 2017.12 | 치과용 임플란트의 디지털방식의 인상채득: 문헌적 고찰 |
| 2017.11 | A simplified method for evaluating the 3-dimensional cement space of dental prostheses by using a digital scanner |
| 2017.10 | 최종 보철물에 대한 고려 없이 전악 임플란트 식립된 환자의 고정성 보철 수복 증례 |
| 2017.10 | 지속적인 재평가를 통해 최적화된 임시 보철을 최종 보철로 이행한 전악 CAD/CAM 고정성 수복 증례 |
| 2017.09 | A Method for Minimizing Rotational Errors of Implant Prostheses |
| 2017.01 | Coloring agent가 지르코니아 색조 재현성에 미치는 영향 |
| 2017.01 | 심한 우식을 동반한 골격성 전치부 개방 교합 환자의 전악 수복 증례 |
| 2016.12 | 심한 Erosion 환자에서 수직고경증가를 동반한 구강회복 증례 |
| 2016.12 | 치근피개술과 Lithium Disilicate Glass Ceramic 수복울 통한 상악 중절치의 심미 보철 증례 |
| 2016.12 | CAD/CAM을 이용한 진료실 Design과 기공실 Design의 비교 분석 |
| 2016.11 | Comparative Analysis of Screw Loosening with Prefabricated Abutments and Customized CAD/CAM Abutments |
| 2016.10 | Piezoelectric Trapezoidal Osteotomy for the Retrieval of a Displaced Dental Implant in the Osteoporotic Mandibular Body |
| 2016.10 | Class III 악간관계와 교합평면 부조화를 보이는 환자의 전악수복증례 |
| 2016.08 | Fabrication of a CAD/CAM monolithic zirconia crown to fit an existing partial removable dental prosthesis |
| 2016.05 | Fabricating a tooth- and implant-supported maxillary obturator for a patient after maxillectomy with computer-guided surgery and CAD/CAM technology: A clinical report |
| 2016.01 | 이중관을 이용한 부분 무치악 환자의 수복 증례 |
| 2015.12 | 가철성 국소의치 지대치 선택을 위한 다원적인 평가 |
| 2015.10 | Prosthetic management of a growing patient with Russell-Silver syndrome: a clinical report |
| 2015.07 | 총의치 난증례에 대한 접근법: 진단부터 최종의치까지 |
| 2015.04 | Digital Smile Design’을 이용한 심미수복증례 |
| 2014.10 | Cellular viability and genetic expression of human gingival fibroblasts to zirconia with enamel matrix derivative (EmdogainjQuery1111012861447377211155_1674716458123) |
| 2014.07 | Osteoblastic and osteoclastic differentiation on SLA and hydrophilic modified SLA titanium surfaces |
| 2014.05 | Fiber reinforced composite post의 표면 처리에 따른 접착 강도 |
| 2014.04 | Cell attachment and proliferation of bone marrow-derived osteoblast on zirconia of various surface treatment |
| 2014.02 | TO DEFINITIVE CAST ACCURATE TRANSFER OF SOFT TISSUE MORPHOLOGY WITH INTERIM PROSTHESIS |
| 2014.01 | Prosthetic Rehabilitation of a Cleidocranial Dysplasia Patient with Vertical Maxillofacial Deficiency: A Clinical Report |
| 2013.11 | Gene expression of MC3T3-E1 osteoblastic cells on titanium and zirconia surface |
| 2013.10 | Full mouth prosthetic rehabilitation based on systemic analysis, diagnosis and treatment plan: a case report |
| 2013.07 | Analysis of occlusal contact and guidance pattern during maximal intercuspal position and protrusive movement |
| 2013.06 | PROSTHETIC REHABILITATION OF A PATIENT WITH UNILATERAL DISLOCATED CONDYLE FRACTURE AFTER TREATMENT WITH A MANDIBULAR REPOSITIONING SPLINT: A CLINICAL REPORT |
| 2013.03 | Implant-supported fixed restoration of post-traumatic mandibular defect accompanied with skin grafting: a clinical report |
| 2013.02 | The effects of mouthguards on the athletic ability of professional golfers |
| 2013.01 | Full-mouth rehabilitation with pressed ceramic technique using provisional restorations Pressed ceramic technique을 이용하여 제작되는 완전 도재관 완전 구강 회복 증례 |
| 2012.10 | 의치의 안정성을 증대시키기 위한 고려 요소: 증례보고 |
| 2012.09 | Effect of implant position, angulation, and attachment height on peri-implant bone stress associated with mandibular two-implant overdentures: a finite element analysis |
| 2012.08 | THE PROSTHETIC REHABILITATION OF A PANFACIAL FRACTURE PATIENT AFTER REDUCTION: A CLINICAL REPORT |
| 2011.10 | 양극산화처리된 티타늄 표면에 이온빔보조증착방식을 이용한 수산화인회석 코팅시 소결온도의 차이가 조골세포에 미치는 영향 |
| 2011.06 | Osteoblast-like Cell Attachment and Proliferation on Turned, Blasted, and Anodized Titanium Surfaces |
| 2011.03 | Overdenture restoration in a growing patient with hypohidrotic ectodermal dysplasia: A clinical report |
| 2011.01 | 진료자세가 고정성 국소의치의 지대치 삭제에 미치는 영향 |
| 2011.01 | 샌드블라스팅과 프라이머가 지르코니아와 레진시멘트의 전단결합강도에 미치는 영향 |
| 2011.01 | 지르코니아 전부도재관 지대치 삭제시 축면 경사각과 만곡 반경에 대한 조사 |
| 2010.10 | Immediate loading of tow implants supporting a magnet attachment-retained overdenture: one-year clinical study |
| 2010.07 | The effects of enamel matrix derivative on the proliferation and differentiation of human mesenchymal stem cells |
| 2010.06 | THE EFFECT OF SURFACE TREATMENT OF FIBER-REINFORCED POSTS ON ADHESION OF A RESIN-BASED LUTING AGENT |
| 2010.03 | 전부 피개관의 치아 형성 시 축면 경사각에 대한 조사 |
| 2010.02 | Retrospective study on traumatic dental injuries in preschool children at Kyung Hee Dental Hospital, Seoul, South Korea |
| 2009.12 | Comparison of osteogenic differentiation of bone marrow stromal cells on zirconia and titanium |
| 2009.10 | Biological Response of Human Gingival Fibroblasts on Zirconia Surface |
| 2009.06 | 정신지체 환자의 협력 진료에 의한 전신마취하 치과치료 증례 |
| 2009.06 | 발치와에 즉시 식립한 쐐기형 임플란트의 생물학적 안정성에 관한 전향적 연구 |
| 2009.04 | Attachment and growth behaviour of human gingival fibroblasts on titanium and zirconia ceramic surfaces |
| 2009.03 | Polymerization shrinkage strain of interocclusal recording materials |
| 2009.03 | Wettability of denture relining materials under water storage over time |
| Case report- occlusal reconstruction of a patient with conservative condylectomy surgery | |
| Bone-marrow derived osteoblast proliferation and maturation on zirconia oxide surface | |
| Gene expression of human gingival fibroblasts cultured on titanium and zirconia ceramic surface using cDNA microarray | |
| A Case Study: Fixed Prosthodontic Restoration Accompanying Displacement of a Condyle-Practical Application of Provisional Restoration Effective in Transmitting Esthetic and Functional Information | |
| Implant Restoration of the Missing Maxillary Anterior Tooth by Immediate Provisional Prosthesis | |
| Full Mouth Fixed Implant Rehabiliation in Chronic Periodontitis Patient | |
| Implant-supported maxillary overdentures retained with conical double crown attachments: a case report | |
| The biological stability of immediately placed tapered implants in tooth extraction sites | |
| Osteogenic potential of bone-marrow derived osteoblast on titanium and zirconium oxide surface | |
| Analysis of human gignival fibroblasts cultured on titanium and zirconia surface by cDNA microarray | |
| Gene expression of MC3T3-E1 osteoblastic cells cultured on titanium surface and zirconia surface by using cDNA microarray | |
| Microarray analysis of bone marrow-derived osteoblast cultured on titanium surface and zirconia surface | |
| Full mouth rehabilitation of the severly worn dentition- application of the functionally generated path technique | |
| Full mouth fixed implant rehabilitation in chronic periodontitis patient | |
| A case study: fixed prosthodontic restoration accompanying displacement of a condyle-practical application of provisional restoration effective in transmitting esthetic and functional information | |
| Reestablishment of vertical dimension with patient severely wear mandibular anterior teeth | |
| Esthetic restoration of replanted anterior teeth in avulsion injuries | |
| 광범위한 치료가 요구되는 정신지체 환아의 협력에 의한 전신마취하 치과 치료 증례 | |
| 하악 피개의치에서 각종 attachment에 따른 임플란트 응력 분석 | |
| 진료 자세가 전부 주조관 치아 삭제면 형태에 미치는 영향 | |
| 상악 완전무치악 환자의 임플란트 고정성 보철 증례 | |
| Full Mouth Rehabilitation의 예후: 3년 경과보고 | |
| Osteoblast-like cell attachment and proliferation on machined, blasted and anodized titanium surface | |
| 편측 하악 과두 흡수를 동반한 측두하악장애 횐자의 고정성 보철 수복을 통한 교합 재구성 증례 Part 2 - 지속적인 follow-up의 중요성 | |
| 교합고경이 소실된 부분 무치악 환자의 치료 증례: 보철적 접근 방법 | |
| 표면 처리에 따른 지르코니아와 레진 시멘트의 결합 강도 | |
| 지르코니아 완전 도재관의 지대치 형성에 대한 조사 | |
| Mini dental implant 이용한 implant supported overdenture에 대한 환자 만족도 | |
| 지르코니아 완전 도재관의 지대치 형성에 대한 조사 | |
| Osteoblast-like cell attachment and proliferation on hydroxyapatite and calcium phosphate coated zirconia | |
| Fast loading with implant supported overdentures: 4 treatment modalities | |
| Skeletal class III tendency 환자의 보철 수복 후 발생한 실패 증례의 요인 분석 및 재수복 | |
| Reciprocation을 고려한 가철성 국소의치 증례 | |
| 대합치 마모에 대한 지르코니아 단일구조 전부도재관의 타당성 연구 | |
| 임플란트를 이용한 상악전치부 보철 수복 증례 | |
| 실란처리 후 heating이 resin과 ceramic의 bond durability에 미치는 영향 | |
| CAD-CAM으로 제작된 모형의 표면 재현성에 대한 연구 | |
| 피부이식술 (skin graft) 과 전정 확장술 (vestibule deepening)을 동반한 임플란트 수복 증례 | |
| Provisional restoration을 이용한 심미적인 구강 회복 증례 | |
| 의치의 stability를 증대시키기 위한 고려 요소 및 임상 술식 | |
| 교합고경이 감소된 상태로 보철수복한 환자의 전악 수복 증례: 가철성 국소의치를 위한 진단적 접근 | |
| 붕괴된 교합거상을 시행한 증례의 예후 평가 | |
| 치질파괴가 심한 치아에서 metal cast post를 이용한 수복 | |
| E.max Press를 이용한 상악전치부 외상환자의 심미 수복 증례 | |
| 붕괴된 교합 고경 거상을 시행한 증례의 예후 평가 | |
| Fast loading with implant supported overdentures: 4 treatment modalities | |
| TiO2 처리에 따른 지르코니아와 레진시멘트의 전단 결합강도 | |
| Fiber reinforced composite post의 다양한 표면처리에 따른 결합강도 변화에 대한 연구 | |
| 한국인의 교합양상에 관한 연구 - 최대교두감합위 및 하악 전방운동시의 교합 접촉 양상 | |
| 다양한 실란 적용 방법이 세라믹과 레진시멘트의 미세인장결합강도와 표면성상에 미치는 영향 | |
| Russel-Silver syndrome 환자의 보철 수복 증례 | |
| 체계적 분석, 진단, 치료 계획을 통한 보철 | |
| Evaluation of Screw loosening of Prefabricated Abutments and Customized CAD/CAM Abutments | |
| 교합평면이 붕과된 다수치 결손 골격성 classII 환자의 전악 보철수복 증례 | |
| 심한 치조골 흡수와 불안정한 하악위를 가진 완전 무치악 환자의 치료 증례 | |
| 심한 치조골 흡수를 동반한 상악 전치부 결손 환자의 가철성 국소의치 수복 증례 | |
| Digital Smile Design을 이용한 심미수복증례 | |
| 임시수복물 주변의 치은형태를 주모형에 정확히 옮기는 방법 | |
| 심미성 및 치주조직의 유지 관리를 고려한 임플란트 보철 증례 | |
| Gingiva-colored ceramic과 modified ovate pontic을 이용한 하악 전치부 보철수복증례 | |
| 붕괴된 교합에서 좋은 예후를 기대할 수 있는 치료전략 | |
| 동적 의치상 이장재 (DIL; Dynamic impression liner)의 임상적용 | |
| Coloring agent가 지르코니아 색조 재현성에 미치는 영향 | |
| 무치악 난증례 환자의 진단의치를 통한 평가 및 최종의치로의 이행 | |
| 저위교합된 임플란트 보철물 재수복 증례 | |
| Maxillary obturator prosthesis after hemimaxillectomy using computer guided surgery and CAD/CAM | |
| Comparative analysis on screw loosening of prefabricated abutments and CAD/CAM abutments | |
| 라미네이트의 제작방식과 도재의 종류가 색조에 미치는 영향에 대한 연구 | |
| 도재의 종류와 제작방식이 라미네이트의 색조에 미치는 영향 | |
| Comparative analysis on stability among different fabrication methods of implant abutments | |
| 이중관을 이용한 부분 무치악 환자의 수복 증례 | |
| 하악골 재건후 제한된 악간공간을 가진 환자의 나사유지형 임플란트 보철수복 증례 | |
| Root coverage와 lithium disilicate glass ceramic 수복을 통한 상악 중절치의 심미수복 증례 | |
| 임플란트를 이용한 심한 치아 우식 환자의 완전 구강회복 증예 | |
| Implant supported obturator prosthesis after partial maxillectomy using stereolithographic surgical template and CAD/CAM-milled titanium bar | |
| Prosthodontic restoration of a young patient with Russell-Silver Syndrome | |
| Life Quality Assessment Depending on Personal Characteristic and Denture Installation | |
| 하악골 재건 환자에서의 임플란트 고정성 보철수복 증례 | |
| 반복하중이 NCF 크라운의 유지력에 미치는 영향 | |
| 상악골 절제술 환자에서 컴퓨터 사이드수술과 CAD/CAM을 이용한 치아, 임플란트 지지 상악 폐색장치 제작 | |
| 심한 우식을 동반한 골격성 전치부 개교 교합 환자의 전악 수복 증례 | |
| Class III 악간관계와 교합평면 부조화를 보이는 환자의 전악보철수복 증례 | |
| Sinus bone grafting with simultaneous implant placement in case of residual bone height less using internal bone level implants | |
| 혼합치열기 부분 무치증 어린이에서 반대 교합된 상악 측절치 형태 이상 수복 증례 | |
| 내부연결 임플란트에서 지대주 연결부 형태가 수직적 침하와 나사풀림에 미치는 영향 | |
| 부적절한 하악위로 제작된 보철물로 인한 근막동통환자의 전악수복증례 | |
| CAD/CAM을 이용한 진료실 Design과 기공실 Design의 비교 분석 | |
| 상악 전치부 치은 구조의 보철적 개선을 통한 심미 수복 증례 | |
| Comparative analysis of the dental office design and the laboratory design using CAD/CAM | |
| Sinus bone grafting with simultaneous implant placement in case of residual bone height loss using internal bone level implants | |
| Marginal and internal fit of lithium disilicate crowns assessed by the triple-scan protocol | |
| 교합이 붕괴된 환자의 고정성 보철 수복 증례 - 시행착올를 거쳐 얻은 임시보철물을 최종 보철물로 정확하게 이행하기 | |
| 임플란트가 전악에 식립되어 내원한 무치악 환자의 고정성보철 수복증례 - 27개의 implant! 어떻게 치료해야 할까요? | |
| Triple scan protocol을 이용한 전부도재관의 변연 및 내면 적합도에 관한 연구 | |
| 외상으로 치근 파절된 상악 중절치의 지르코니아 ㅣ지대주를 이용한 전치부 단일 임플란트 심미 수복 증례 | |
| 전치부 단일 임플란트 보철물의 연조직 결손의 비수술적 접근법: a clinical report | |
| CAD/CAM과 conventional method로 제작된 의치상의 적합도 정도 비교 | |
| Combination syndrome 환자의 보철 수복 증례 | |
| Comparison of palatal fit of dentures fabricated by injection-molding techniques versus rapid prototyping and milling | |
| Complete denture of a skeletal Class III patient with flabby tissue: A case report. | |
| Microwave-assisted Synthesis of Silk Fibroin-based Carbon Quantum Dots. | |
| Assessment of Marginal and Internal Fit of Lithium Disilicate Crowns Using the Triple-scan PRotocol | |
| Effect of Fabrication Materials and Techniques on Color of Veneers | |
| 기존 임플란트를 이용한 임플란트 피개의치 재수복 증례 | |
| 심한 마모를 가? 환자에서 전자 서베잉을 이용한 금관 및 국소의치 수복 | |
| 임플란트간 기울기에 따른 인상 채득 방법의 3차원적 비교 | |
| Panfacial fracture 의 reduction 한계를 전악 보철 수복으로 극복한 증례 | |
| 치과용 소독제가 인상체의 체적 안정성에 미치는 영향 | |
| 굴곡된 전치부 영역에서 디지털과 통상적 인상법의 정확성에 관한 3차원적 비교연구 | |
| 시멘트타입 임플란트 보철물과 CLF 시스템 임플란트 보철물의 미생물 투과도 비교 | |
| 임플란트 고정체 간의 3차원 거리 비교를 통한 임플란트 인상법의 정확도 연구 | |
| 심한 마모 및 부식 환자의 전악 보철 수복 | |
| 장기간 무치악 환자에서 3D printer를 활용해 모형없이 제작한 양악 총의치 수복증례 | |
| 가압 주형법과 CAD/CAM 밀링 방식을 이용한 양악 총의치 수복 비교 증례 | |
| The effect of dental disinfectant on dimensional stability of impression material | |
| Hard layer 및 air space 부여를 통한 새로운 mouthguard 제작 방법 | |
| 임플란트를 이용한 심한 우식환자의 완전구강회복 증례 | |
| 얼굴 스캔과 구강 스캔을 통해 CAD/CAM 방식으로 제작한 전치부 지르코니아 고정성 보철물 | |
| Accuracy of implant position with different intraoral scanbody shape | |
| 한국 성인의 가철성 의치의 사용과 우울증의 관련성에 관한 연구 | |
| Mechanical complication and risk factors associated with CAD/CAM custom abutments: a 4-year retrospective study | |
| Mechanical complication and risk factors associated with CAD/CAM custom abutments | |
| Margin fitness and bacterial penetration of cementless fixation system of the dental implant prosthesis | |
| 환자 분석과 치료계획 및 기공물 제작 과정에 디지털 방식을 적용한 전악 가철성 보철 수복 증례 | |
| 심한 치조제 흡수 환자에서의 임플란트 지지 국소의치를 활용한 완전구강회복 증례 | |
| CAD/CAM 기술을 활용한 양악 총의치 수복 증례 | |
| Various techniques for replicating peri-implant soft tissue contours of implant supported fixed dental prostheses | |
| 심한 마모와 부식을 지니 골격성 III급 환자의 교정치료를 동반한 수복증례 | |
| Accuracy of digital impression with intra-oral scanner and micro-CT for full arch implant rehabilitation | |
| 내부연결형 임플란트데서 기성 지대주와 맞춤 지대주의 수직 침하 비교 | |
| 하악의 orientation과 하악의 개구 패턴에 대한 기하학적 분석: pilot study using cone beam CT and intraoral scanner | |
| Multilayer precolored zirconia의 종류에 따른 색조 분포에 관한 연구 | |
| 치은모델을 이용한 임플란트 내 다양한 직경의 어버트먼트 축 방향 변위 |
보철과 김형섭(치과병원장), 배아란, 홍성진, 이유승 교수 - 대한치과보철학회 '아시아 국제 공동학술대회 사전 간담회' 참석
2026-11-05
구강악안면외과 권용대(치과대학장), 보철과 배아란 교수 - 국제임플란트학회 이스탄불 리더십 미팅 및 콘퍼런스 참석·감사패 수상
2026-06-04
구강악안면외과 권용대(치과대학장), 보철과 배아란 교수 - 국제임플란트학회 한국지부 '2026 1st Academy' 참석
2026-04-29
보철과 권긍록, 배아란, 노관태, 치주과 임현창 교수 - 대한치과보철학회 '제95회 학술대회' 연자로 나서
2026-03-20
보철과 권긍록, 배아란, 노관태, 치주과 임현창 교수 - 대한치과보철학회 '제95회 학술대회' 참석 및 패널, 연자로 나서
2026-03-19
구강악안면외과 권용대(치과대학장), 보철과 권긍록, 배아란 교수, 손민재 전공의 - 국제임플란트학회 '2025 Case Competition' 참석 및 발표자로 나서
2026-01-07
보철과 배아란 교수 - 대한구강악안면임플란트학회 '2025 추계학술대회' 연자로 나서
2025-10-02
[인사] 경희대병원 의료기술협력단장 외
2025-09-02
구강악안면외과 권용대(치과대학장), 보철과 배아란 교수 - 국제임플란트학회 '2025 Global Leadership·Conference' 참석
2025-07-10
구강악안면외과 권용대(치과대학장), 보철과 배아란 교수 - 국제임플란트학회 'Global Leadership·Conference' 참석
2025-06-12
보철과 배아란 교수 - 대한치과보철학회 '제93회 학술대회' 연자로 나서
2025-04-25
구강악안면외과 권용대, 보철과 배아란 교수 - ITI 국제임플란트학회 한국지부 회장 및 스터디클럽 코디네이터 취임
2025-02-07
구강악안면외과 권용대, 보철과 배아란, 홍성진 교수 - '임플란트 식립 증가량보다 제거율 높아져' 분석 결과 발표
2024-08-09
구강악안면외과 권용대, 보철과 배아란 교수 - 대한치의학회, 한국보건산업진흥원 연구과제 'MKA e-class 교육과정 개발' 참여
2024-07-25
보철과 권긍록, 배아란 교수 - ITI 국제임플란트학회 'ITI 월드 심포지엄 2024' 참석
2024-05-27
치주과 정종혁, 신승윤, 신승일, 보존과 최경규, 김덕수 교수 등 - 치과대학 예비 본과 3학년 대상, 등원식 및 가운 전달식 참석
2024-02-19
보철과 배아란 교수 - ‘2023 오스템미팅 서울’ 연자로 나서
2023-11-28
보철과 배아란 교수 - 대한치과이식임플란트학회, '2023 오스템 미팅' 연자로 나서
2023-11-22
구강내과 전양현, 보철과 배아란 교수 - ‘치과의사 국가시험 실기시험 평가 목표 제고를 위한 공청회’ 좌장 및 연자로 나서
2023-11-16
구강내과 전양현, 보철과 배아란 교수 - '치과의사 국가시험 실기시험 평가 목표 제고를 위한 공청회' 좌장 및 연자로 나서
2023-11-14
보철과 배아란 교수 - 대한치과이식임플란트학회 '2023 오스템 미팅' 연자로 나서
2023-11-14
보철과 배아란 교수 - '2023 오스템 미팅 서울' 연자로 나서
2023-11-13
구강내과 전양현, 보철과 배아란, 구강악안면외과 최병준 교수 - ‘치과의사 국가시험 실기시험 평가 목표 제고를 위한 공청회’ 좌장, 연자, 사회자로 나서
2023-11-13
보철과 배아란 교수 - ‘2023 오스템미팅 서울’ 연자로 나서
2023-11-02
보철과 배아란 교수 - '치과의사 국가시험 평가목표 제고를 위한 공청회' 발표자로 나서
2023-10-25
구강악안면외과 권용대, 보철과 배아란 교수 - 좁은 직경의 임플란트, 장기 안정성과 생존률 입증
2023-09-06
보철과 배아란 교수 - 아름다운 미소 되찾기 위한 방법, ‘라미네이트’ 의 유의점
2023-09-01
보철과 배아란 교수 - 임플란트와 틀니
2023-07-26
보철과 배아란 교수 - 대한구강악안면임플란트학회 'Implant & Perioplastic Surgery Lecture and Workshop' 프로그램 디렉터로 나서
2023-07-05
보철과 김형섭, 배아란 교수 - 대한디지털치의학회 제3회 Digital Pinnacle Forum 참석
2023-07-04
보철과 권긍록, 배아란, 구강악안면외과 권용대, 정준호 교수 - 'ITI 국제임플란트학회 7회 컨센서스 컨퍼런스-애뉴얼 미팅' 참석
2023-05-23
보철과 권긍록, 배아란 교수 - ITI 국제임플란트학회 한국지부 회장 및 공보이사 취임
2023-04-07
보철과 권긍록, 배아란 교수 - 공직치과의사회 차기 회장 선출 및 부의장 유임
2023-03-22
보철과 권긍록, 배아란 교수 - 공직치과의사회 역대 회장 초청 간담회 참석
2023-02-14
보철과 배아란 교수 - 수명 다한 치아의 ‘심미·기능’ 모두 살리는 ‘보철 치료’의 모든 것
2023-01-16
보철과 배아란, 홍성진 교수 - 대한치과보철학회 '우수보철치과의사 과정' 연자로 나서
2022-09-20
구강악안면외과 권용대, 보철과 배아란 교수 - 건강보험공단, '임플란트 합병증 요인 분석' 결합 선도사례 선정
2022-08-30
보철과 권긍록, 김형섭, 배아란, 노관태, 백장현, 홍성진, 이영후 교수 - ""치과기공사와 함께 만드는 전치부 심미 수복"" 역자로 참여
2022-07-07
보철과 배아란 교수 - 임플란트 주위염
2022-05-11
보철과 배아란 교수 - 임플란트 주위염
2022-05-10
치주과 정종혁, 신승일, 보철과 배아란, 교정과 김성훈 교수 등 - 22학년도 경희대학교 치과대학 등원식 참석
2022-04-29
치주과 정종혁, 신승일, 보철과 배아란, 교정과 김성훈 교수 등 - 22학년도 경희대학교 치과대학 등원식 참석
2022-04-19
보철과 배아란 교수 - KAOMI 종합학술대회 iAO2022에서 연자로 나서
2022-03-10
보철과 배아란 교수 - 제29회 KAOMI 국제종합학술대회 iAO2022에서 연자로 나서
2022-02-17
보철과 배아란 교수 - KAOMI 주관, '제29회 국제종합학술대회'에 연자로 나서
2022-02-08
감사와 응원의 메시지를 전해주세요.
나도 작성하기준비중입니다.
페이지 로딩중입니다.
잠시만 기다려주시기 바랍니다.
